PATCH HEAT SEAL APPLICATION INFO:  Our patches require a industrial heat press for proper application.  Pressure should be medium, temperature 400 degrees and 20 seconds of pressure.  To reinforce application, stitch the outer edge of the patch.

OUTDOOR MAGNET CARE: Prior to application, clean the flat metallic surface of where you will apply your magnet.  Use care when in cold conditions, magnet may become brittle.  long term usage may result in fading due to ultraviolet rays.  Product is not for use under water or aircraft.  Make sure to remove magnet from vehicle before a car wash.

SCREEN PRINTED TRANSFERS:  Prior to application, press cotton, polyester, blend garment to rid of any moisture.  Transfers are durable & opaque on light or dark garments. Application time= 5-7 seconds.  Temperature= 325 degrees. pressure= firm.  Peel= hot.